Binks GEMS, Maintenance & Repair Manual

Page: 3 / 38

77-2985-R0.5 3/38
EN
It is the of the to this to the of the
For see the
READ THE MANUAL
read and all safety, and
TRAINING
EQUIPMENT HAZARD
can cause the to or start
LOCK OUT / TAG-OUT
Failure to de-energize, disconnect, lock out and tag-out all power sources before
performing equipment maintenance could cause serious injury or death.
PRESSURE RELIEF PROCEDURE
Always follow the pressure relief procedure in the equipment instruction manual.
AUTOMATIC EQUIPMENT
Automatic equipment may start suddenly without warning.
KEEP EQUIPMENT GUARDS IN PLACE
KNOW WHERE AND HOW TO SHUT OFF THE EQUIPMENT IN CASE OF AN EMER-
GENCY
WEAR SAFETY GLASSES
Failure to wear safety glasses with side shields could result in serious eye injury or
INSPECT THE EQUIPMENT DAILY
Inspect the equipment for worn or broken parts on a daily basis. Do not operate the
NEVER MODIFY THE EQUIPMENT
Do not modify the equipment unless the manufacturer provides written
STATIC CHARGE
Fluid may develop a static charge that must be dissipated through proper grounding
of the equipment, objects to be sprayed and all other electrically conductive objects
in the dispensing area. Improper grounding or sparks can cause a hazardous condi-
tion and result in fire, explosion or electric shock and other serious injury.
ELECTRIC SHOCK / GROUNDING
Improper equipment grounding, poor ventilation, open flame or sparks can cause hazard-
ous conditions and result in fire or explosion and serious injury.
PROJECTILE HAZARD
You may be injured by venting liquids or gases that are released under
PINCH POINT HAZARD
Moving parts can crush and cut. Pinch points are basically any areas where there are
NOISE HAZARD
You may be injured by loud noise. Hearing protection may be required when using
PROP 65 WARNING
WARNING: This product contains chemicals known to the State of California
HIGH PRESSURE CONSIDERATION
High pressure can cause serious injury. Relieve all pressure before servicing. Spray
from the spray gun, hose leaks, or ruptured components can inject fluid into your
WEAR RESPIRATOR
Toxic fumes can cause serious injury or death if inhaled. Wear a respirator as recom-
mended by the fluid and solvent manufacturer’s Safety Data Sheet.
TOXIC FLUID & FUMES
Hazardous fluid or toxic fumes can cause serious injury or death if splashed in the
eyes or on the skin, inhaled, injected or swallowed. LEARN and KNOW the specific
FIRE AND EXPLOSION HAZARD
Improper equipment grounding, poor ventilation, open flame or sparks can cause a
Plural Component Materials Hazard
Because of the vast number of chemicals that could be used and their varying chemi-
cal reactions, the buyer and user of this equipment must determine all facts relating
to the materials used, including any of the potential hazards
Halogenated hydrocarbon solvents can cause an explosion when in contact with
aluminum components of a pressurized or closed fluid system.
READ THE MANUAL
read and all safety, and
All must be before equipment.
EQUIPMENT HAZARD
can cause the to or start
PRESSURE RELIEF PROCEDURE
Always follow the pressure relief procedure in the equipment instruction manual.
KEEP EQUIPMENT GUARDS IN PLACE
KNOW WHERE AND HOW TO SHUT OFF THE EQUIPMENT IN CASE OF AN EMER-
GENCY
WEAR SAFETY GLASSES
Failure to wear safety glasses with side shields could result in serious eye injury or
In this manual, the words WARNING, CAUTION and NOTE are used to emphasize important safety information as follows:
NOTE
or
in
! WARNING
! CAUTION
Read the following warnings before using this equipment
! WARNING