Binks airLess 1M spraY gun: tWist-tip reVersiBLe nOzzLe cLeaner
5
generaL
The Twist-Tip Nozzle Cleaner allows purging of a
clogged nozzle orifice without disassembly from the
spray gun. The tungsten carbide nozzle is permanently
assembled into the rotatable cylinder tip insert and
handle assembly. No alignment or adjustments are
required.
asseMBLY
Assembly to spray gun is simple. Please refer to the
detailed assembly instructions on page 7. The exploded
view at right is for part ordering reference.
Features OF tHe tWist-tip attacHMent
• Fits most popular airless spray guns
• Low friction turning
• Equals or exceeds life of other reversible spray tips
• Hand-tightened seal system
• Assembly suitable for solvent and water-based
• Maximum working pressure: 7,500 PSI
• Rapid changing of the tip and base by hand without
tools
iMpOrtant Operating instructiOns
1. The spray gun must be shut off while rotating the
Twist-Tip attachment handle.
2. If leakage occurs, unit must be disassembled,
cleaned and parts checked for any damage. Replace
damaged parts with genuine Binks parts.
3. With proper care, the Twist-Tip attachment will give
long, reliable service. To maintain this performance,
it should be flushed with solvent or proper cleaning
fluid following each spray period.
Binks TWisT-Tip
reversiBle nOzzle CleAner
WArninG
Do not operate unit with leakage from the spray gun,
twist-tip attachment or hose or severe injury may result.
!
iteM
nO. part nO.
DescriptiOn
QtY.
1
454-3
SAFETY GuARD
ASM
................. 1
1
454-5
SAFETY GuARD
(G Thread) ASM
... 1
2
454-1
(Part of Safety Guard)
................... 1
3
454-Tip Size SPRAY TIP ............................... 1
parts List
When ordering, please specify Part No.
1
2
2
3
see page 7 FOr
DetaiLeD asseMBLY instructiOns
