background image

2

  

Warning

!

In this part sheet, the words 

Warning

cautiOn

 and 

nOte

 are used to emphasize important safety information as follows:

 CAuTiOn

Hazards or unsafe practices which could 

result in minor personal injury, product 

or property damage.

!

   WArninG

Hazards or unsafe practices which could 

result in severe personal injury, death or 

substantial property damage.

!

nOTe

important installation, operation or 

maintenance information.

read the following warnings before using this equipment.

FOr FurtHer saFetY inFOrMatiOn regarDing BinKs anD DeViLBiss eQuipMent, see tHe  

generaL eQuipMent saFetY BOOKLet (77-5300).

it is tHe respOnsiBiLitY OF tHe eMpLOYer tO prOViDe tHis inFOrMatiOn tO tHe OperatOr OF tHe eQuipMent.

reaD tHe ManuaL

 

Before operating finishing equipment, read and understand all 
safety, operation and maintenance information provided in the 
operation manual.

Wear saFetY gLasses

 

Failure to wear safety glasses with side shields could result in 
serious eye injury or blindness.

De-energize, Depressurize, DiscOnnect anD LOcK Out aLL 
pOWer sOurces During Maintenance

Failure to De-energize, disconnect and lock out all power 
supplies before performing equipment maintenance could cause 
serious injury or death.

OperatOr training

 

All personnel must be trained before operating finishing 
equipment.

eQuipMent Misuse HazarD

 

Equipment misuse can cause the equip ment to rupture, 
malfunction, or start unexpectedly and result in serious injury.

Keep eQuipMent guarDs in pLace

 

Do not operate the equipment if the safety devices have been 
removed.

HigH pressure cOnsiDeratiOn

High pressure can cause serious injury. Relieve all pressure before 
servicing. Spray from the spray gun, hose leaks, or ruptured 
components can inject fluid into your body and cause extremely 
serious injury.

get iMMeDiate MeDicaL attentiOn

To prevent contact with the fluid, please note the following:
  a)  Never point the gun/valve at anyone or any part of the body.
  b)  Never put  hand or fingers over the spray tip.
  c)  Never attempt to stop or deflect fluid leaks with your hand, 

body, glove or rag.

  d)  Always have the tip guard on the spray gun before spraying.
  e)  Always ensure that the gun trigger safety operates before 

spraying.

  f)  Always lock the gun trigger safety when you stop spraying.

pressure reLieF prOceDure 

Always follow the pressure relief procedure in the equipment 
instruction manual.

MeDicaL aLert

Any injury caused by high pressure liquid can be serious. If you are 
injured or even suspect an injury:
  a)  Go to an emergency room immediately.
  b)  Tell the doctor you suspect an injection injury.
  c)  Show the doctor this medical information or the medical alert 

card provided with your airless spray equipment.

  d)  Tell the doctor what kind of fluid you were spraying or 

dispensing.

  e)  Refer to the Material Safety Data Sheet for specific 

information.

tOxic FLuiD & FuMes

 

Hazardous fluid or toxic fumes can cause serious injury or death if 
splashed in the eyes or on the skin, inhaled, injected or swallowed. 
LEARN and KNOW the specific hazards or the fluids you are using.

Wear respiratOr

 

Toxic fumes can cause serious injury or death if inhaled. Wear a 
respirator  as recommended by the fluid and solvent 
manufacturer’s Material Safety Data Sheet.

eLectric sHOcK / grOunDing

 

Improper grounding or sparks can cause a hazardous condition 
and result in fire, explosion or electric shock and other serious 
injury.

prOjectiLe HazarD

You may be injured by venting liquids or gases that are released 
under pressure, or flying debris.

Fire anD expLOsiOn HazarD

Improper equipment grounding, poor ventilation, open flame or 
sparks can cause hazardous conditions and result in fire or 
explosion and serious injury.

static cHarge

 

Fluid may develop a static charge that must be dissipated through 
proper grounding of the equipment, objects to be sprayed and all 
other electrically conductive objects in the dispensing area. Improper 
grounding or sparks can cause a hazardous condition and result in 
fire, explosion or electric shock and other serious injury.

prOp 65 Warning

WARNING: This product contains chemicals known to the  
State of California to cause cancer and birth defects or other 
reproductive harm.

ca prOp

65

Summary of Contents for 44-6000









Reviews: