Binatone AEJ-1701, Instruction Manual

Page: 7 / 30

7 77 77
ENGLISH
! Do not touch the hot surfaces of the appliance. Do not touch the
outer surfaces of the kettle with the exception of the heat insu-
lated handle, when water is boiling or with hot water inside the
device.
!
Allow kettle to cool prior to cleaning and storing.
!
Disconnect the appliance from the electricity supply before stor-
age, filling it with water/emptying it or moving it from one
place to another.
! The appliance should always be placed on and used on a heat
resistant, horizontal and dry surface.
! To avoid being burnt by hot vapor always close the lid tightly
before use. Avoid exposure to hot vapor. W W W W WARNING! Nev ARNING! Nev ARNING! Nev ARNING! Nev ARNING! Never er er er er
open the lid immediately before or after boiling tem- open the lid immediately before or after boiling tem- open the lid immediately before or after boiling tem- open the lid immediately before or after boiling tem- open the lid immediately before or after boiling tem-
perature is reached perature is reached perature is reached perature is reached perature is reached.
!
The kettle is protected against overheating and if switched on
without water, an automatic safety cut out device will switch it
off. If the safety device is activated, allow the kettle to cool down
prior to boiling water in it. The kettle will not switch on if it’s too
hot. W W W W WARNING! Frequent switching the kettle on with- ARNING! Frequent switching the kettle on with- ARNING! Frequent switching the kettle on with- ARNING! Frequent switching the kettle on with- ARNING! Frequent switching the kettle on with-
out water might result in the safety device failure, out water might result in the safety device failure, out water might result in the safety device failure, out water might result in the safety device failure, out water might result in the safety device failure,
that is why prior to switching the kettle on always that is why prior to switching the kettle on always that is why prior to switching the kettle on always that is why prior to switching the kettle on always that is why prior to switching the kettle on always
check the water level. Always make sure the water check the water level. Always make sure the water check the water level. Always make sure the water check the water level. Always make sure the water check the water level. Always make sure the water
level in the kettle is not too low. level in the kettle is not too low.
level in the kettle is not too low. level in the kettle is not too low. level in the kettle is not too low.
! Always switch the kettle off prior to lifting it from the base.
! Use the kettle only with the supplied base.
! Do not fill a hot kettle with cold water or vice versa. W W W W WARN- ARN- ARN- ARN- ARN-
ING! Avoid sharp temperature fluctuations when fill- ING! Avoid sharp temperature fluctuations when fill- ING! Avoid sharp temperature fluctuations when fill- ING! Avoid sharp temperature fluctuations when fill- ING! Avoid sharp temperature fluctuations when fill-
ing the kettle with water. ing the kettle with water. ing the kettle with water. ing the kettle with water. ing the kettle with water.
!
Connect the device only to an electrical supply with a protective
earthing. If your socket has no protective earthing, contact a
qualified specialist. Do not modify the plug and do not use cord
adapters. W W
W W
WARNING! Electric shocks might occur if ARNING! Electric shocks might occur if
ARNING! Electric shocks might occur if ARNING! Electric shocks might occur if
ARNING! Electric shocks might occur if
the kettle is plugged into an unearthed power sup- the kettle is plugged into an unearthed power sup-
the kettle is plugged into an unearthed power sup- the kettle is plugged into an unearthed power sup-
the kettle is plugged into an unearthed power sup-
p l y . p l y . p l y . p l y . p l y .
! Clean the heating element of the kettle often to de-scale it.
Remember that use of a heavily scaled kettle might result in its
malfunction. W W W W WARNING! De-scale the kettle using only ARNING! De-scale the kettle using only ARNING! De-scale the kettle using only ARNING! De-scale the kettle using only ARNING! De-scale the kettle using only
specially designed cleaning agents. specially designed cleaning agents.
specially designed cleaning agents. specially designed cleaning agents. specially designed cleaning agents.
!
Before turning the kettle on, make sure that the lid is closed;
otherwise the kettle will not turn off after boiling.
! After use of the appliance, the base of the kettle might be wet. It
is a normal condition of operation, caused by escaping steam,
used to activate the kettle’s automatic turning off function.
!
Do not tilt the filled kettle backwards, since water can spill
through the steam vent. If this happens, the kettle should be
wiped before turning it on.
!
Do not take the electric cord out of the socket during operation of
the appliance. You should first turn it off.
! After using the appliance let it cool for a few minutes. After that
you can boil water in it again.