Installation Instructions - BMW F10 CarPlay MMI Prime
Next, we’ll need to work in the Head Unit area:
Remove the large square harness (Quadlock) from the back of the head unit by pressing on the center
tab of the latch and pulling it back. Once the latch is pressed and pulled back, the square connector
will begin to slide out.
Please, move the fiber optic cable from the factory quadlock (if you have one in the original quadlock
as not all vehicles do) by unfastening the securing tab and pulling the Fiber Optic cable out. The cable
will not resist being removed if the securing latch is gently lifted. Reinsert it in the PnP harnesses
quadlock in the same spot.
Once the Fiber Optic Cable has been moved to the new harness, plug in the square harness into the
back of the head unit at one end and to the harness coming out of the dashboard at the other.
For reference the process will be very similar to the one shown in this video:
https://youtu.be/gccI73nl5Qk?t=395
BimmerTech FZE | Phone: +1(646) 439-7920 | www.bimmer-tech.net
13
