BIMG METVISA FIE.20, Instruction Manual

Page: 9 / 28

9
IMPORTANT
The packaging components (cardboard, wood, foam, strips, etc.) are products that can be
assimilated to solid urban waste and can be disposed of without difficulty. If the equipment is
installed in countries with different standards, dispose of the packaging in accordance with
current regulations. Dispose of the product correctly to help protect the environment. For more
information on recycling, contact your local authorities, waste disposal service or the shop where
you purchased the product.
3. Installation
3.1 Equipment Layout
The connection to the mains and the arrangement for operation must be carried out by a
qualified professional. Check that the voltage of the eqiuipment matches the mains voltage.
• It is essential to make this manual available to the professionals who will carry out the
installation.
To facilitate transport, the appliance is packed with the dismantled easel and registration.
Fixing the easel to the cabinet should be done with the screws that come with the apparatus.
Follow the instructions below for proper assembly:
1. Support the easel over a
level surface;
2. Position the cabinet over the
easel according to the image at the side;
3. Align cabinet holes
with the easel threads;
4. Tighten the screws provided
using a suitable key;
5. Finally, mount the threaded
TAP into the tube below the
tank.
To ensure correct operation and safety, the appliance should be positioned over a sufficiently
wide, level, dry and stable floor area, away from heat sources, water taps and where there is no heavy
human traffic. Install your device leaving a free area on the front and top of the device, and a distance