BIMG Metvisa CFG04, Instructional Manual

Page: 9 / 28

9
To ensure correct operation and safety, the machine must be positioned in an airy
environment and on a sufficiently wide, level, dry and stable support surface, away from heat sources
and water taps, and at a medium height of 80 cm. Install your equipment by leaving a distance of at
least 20 cm around it and 1 m in height, so that it has enough space for inspection, maintenance,
cleaning, use and connection of the gas supply hose.
* The minimum height measurement of 1 m was determined considering the area that the presser
occupies when being lifted.
ATTENTION!
This equipment uses LPG (liquefied petroleum gas) for heating purposes, and can not be
installed indoors where there is no air renewal, as this gas is highly toxic.
Keep the gas canister at least 1.5 m away from electrical outlets, circuit breakers, switches, or
any spark or flame equipment where they may come into contact with LPG gas, causing
serious injury to the operator .
Do not install near flammable materials or products.
ATTENTION!
The installation and the place where the equipment will be disposed must comply with the
Standards for the Prevention of Risks at Work and Safety at Work in Machinery and
Equipment (Regulatory standard NR-12).
The manufacturer shall not be liable for any direct or indirect damages caused by non-
compliance with these standards and other instructions presented in this manual.