BIMG Metvisa CFG04, Instructional Manual

Page: 13 / 28

13
6. Repeat the procedure for lighting each burner;
7. Adjust the level of the fire on the gas regulator knob and observe the quality of the flame. The
ideal flame should be in blue color. Follow the instructions below to adjust the flame:
• Each burner tube has a flame regulator, where it is pre-set at the factory. To regulate the
ideal flame of each burner, check that the burners are off and pull out the burner drawer. At
the bottom of the drawer is an opening that gives access to the clamp. Loosen the clamp bolt
(with a suitable tool) and slide it into the burner tube, releasing the air inlet more or less.
8. After all the burners are lit, close the drawer carefully so that the presser does not come down
suddenly;