36/40
Timer "
": move the cursor to select the desired time:
1H, 2H, ...8H after which the fan will turn off. The time (hour)
corresponds to the time indicated on the button: 1H= 1 hour,
2H= 2 hours, 4H= 4 hours, 8H= 8 hours.
The Timer is deactivated by pressing the "
" button.
Direction. The button selects clockwise or
counterclockwise rotation (Summer/Winter): thus, the air is
directed from the bottom to the top or vice versa. Only
activate this function if the motor has stopped completely.
The "
" button turns the LED light on and off.
The LED lights alternate as follows: warm light (3000K
approx)-off-cool light (6000K approx)-off-neutral light
(4000K approx)-off.
The "
" button: starts the weekly programmer (it is activated only via the Smartphone), and
sets: the on/off periods of each day of the week and the temperature. For the on/off periods,
select the time (hours and minutes) and confirm the function (on or off) and then the
following (off or on); the periods can be repeated during the week; mode, direction and light
adjustment.
Balancing the fan
If the fan oscillates during use, switch it off and hook the clip into the centre of one blade;
switch it on again, and if it still oscillates remove the clip and put it on another blade until the
oscillation is reduced: this is the blade that needs to be counterweighted.
On this blade, reposition the clip in several places (from the centre towards the tip) to locate
the point that eliminates oscillation. On the surface of the blade near the clip, glue the
supplied counterweight, remove the clip and test the fan again.
If it still oscillates, add another counterweight. If it worsens, try again to find the most suitable
counterweight point until a balance is found.
