27/40
Establish the electrical connections according to the indications given in the connection
diagram. Use the terminal block on the mounting plate for cable connections, observing
polarity. Connect all yellow/green ground wires to the ground wire from the house line.
Make sure that no wires are outside the terminal block.
Carefully push the wires into the box and insert the receiver, including the antenna cable.
The layout has a 0-I switch on the wall, which turns the power on or off.
Lift the motor body (2), align the
keyhole slots with the screws of the
mounting bracket (1) and turn
anticlockwise until locked, then secure
with the other two screws set aside
earlier. Check that the fan is securely
fastened to the ceiling before
attempting to switch on.
