34/40
The device can also be paired
using the “AP Mode”, press
the button
“
” for about
five seconds; the green light
turn on and you will hear n.2
"Beep" fast and release the
button.
Access
the
smartphone WI-FI settings
and connect to the “Bimar
Live Smart xxx” or “Smart
Life xxx” network, then press
"connect now".
If the operations described above do not work properly, the fan must be reset as follows:
switch off the power supply via the circuit breaker, and leave the appliance disconnected for
30 seconds. Turn on the power again; press the “
” button for about five seconds; the
green light will light up, you will hear a “Beep” sound, then you will hear 2 quick "Beeps", then
release the button.
Settings and customisations.
Open the smartphone screen and press
in the bottom right corner to customise the following
functions: Home management, Message centre,Assistance centre,Configure (audio, alerts, info,
cache memory clear).
Press
in the bottom centre to customise operation of the device to suit the various scenarios or
operating situations provided by the APP (for example: Back home, Leaving home, Dawn,
Goodnight, Temperature, Humidity, Weather, Air quality, Dawn/dusk) or in combination with other
devices.
Press
in the bottom left corner and then in the top of the screen, for example:
to
customise (update and/or change where permitted) the appliance's position or the outdoor wind
speed, air pressure, humidity and temperature (see right).
Press
top right to customise the following: Change Device name, Device position, Check
Network, Third-party devices upported: Amazon Alexa, Google Assistant, Device, sharing, Create a
Comment group, Device Info, Feedback, Update Firmware
The smartphone must be connected to Wi-Fi or cellular data network for remote control.
