-6-
4. Safety warnings
1. The operator / the operating company has to ensure the correct usage and has
to ensure that this product is used only by staff, who is trained and authorised
to use this product.
2. The product must be only used by one person at a time and he has to ensure
the necessary clearance to manoeuvre the product safely.
3. Keep the operating area clear from all by-standers, when moving, lifting and
lowering the product.
4. The product must not be used to transport humans or live animals.
5. The product must not be used by children.
6. The product must not be overloaded. The maximum load is 2500 kg.
7. The product must not be used in applications, where the danger exists the
maximum load is exceeded.
8. Distribute the load as evenly as possible.
9. Do not pull the product with vehicles.
10. Keep the centre of gravity as low as possible.
11. Stack loads from bottom to top, heaviest to lightest.
12. Always observe the load and watch out for goods about to drop. In this case,
stop immediately and rearrange the load.
13. Reduce the load correspondingly if the product is to be used on angled surfaces
e.g. ramps.
14. When moving the product over a slightly inclined surface (< 2°), the forks must
be empty.
15. The product must not be used on inclining paths (> 2°), as the danger of loss
of control exists.
16. Use both hands to push the product loaded and unloaded and move it slow
and evenly.
17. The required force needed to handle the product is varying with weight of the
load, the conditions of flooring and the product itself. Consider the frequency
of use under load.
18. Use only spare parts or accessories recommended by the manufacturer.
19. Do not modify the product or install accessory equipment.
20. Do not use the product in wet or extremely humid environments.
21. Do not use the product in explosive atmospheres.
22. Always wear personal protective equipment.
23. Never reach inside the lifting mechanism or below the forks.
24. Be aware that wind can affect the stability and handling of the product,
particularly when transporting loads with large surface areas.
25. Never leave the loaded product unattended.
26. The product must be used on substantially firm, smooth, level and prepared
surfaces.
(IM)237‐000413_RHP25_GB-IM_V4_150626.indd 6
7/3/15 17:09
