background image

 

 

Part No 442503 

 

Form No F081512A 

 

Z FORCE BLOWER Owner’s Manual

 

 

 

 

DO  NOT 

run  this  equipment  indoors  or  in  any  poorly  ventilated  area.  Refueling  outdoors  is 

recommended. 

DO NOT 

refuel this equipment while the engine is running. Allow engine to cool for at least two minutes 

before refueling. 

DO NOT 

store gasoline near an open flame. 

DO NOT 

remove gas cap while engine is running. 

DO NOT 

start or operate engine if strong odor of gasoline is present. 

DO NOT 

start or operate engine if gasoline is spilled. Move equipment away from spill until gasoline has 

completely evaporated. 

DO NOT 

smoke while filling the fuel tank. 

DO NOT 

check for spark with spark plug or spark plug wire removed. Use an approved spark tester. 

DO  NOT 

operate  engine  without  a  muffler.  Inspect  muffler  periodically  and  replace  if  necessary.  If 

equipped with muffler deflector, inspect deflector periodically and replace if necessary. 

DO NOT 

operate engine with grass, leaves or other combustible material near the muffler. 

DO NOT 

touch muffler, cylinder, or cooling fins when hot. Contact with hot surfaces may cause severe 

burns. 

DO NOT 

leave equipment unattended while in operation. 

DO NOT 

park

 

equipment on a steep grade or slope. 

DO NOT 

operate equipment with bystanders in or near the work area. 

DO NOT 

allow children to operate this equipment. 

DO NOT 

operate equipment with guards removed. 

DO NOT 

operate

 

equipment near hot or burning debris or any toxic or explosive materials. 

DO NOT 

operate

 

equipment on slopes greater than specified in Specifications section of this manual. 

DO NOT 

operate near steep embankments or drop offs. 

DO NOT

 transport this unit attached at excessive speeds, doing so may result in serious injury or death. 

ALWAYS

 make sure the machine is attached to the mower securely.

 

ALWAYS 

remove spark plug wire when servicing equipment to prevent accidental starting. 

ALWAYS

 wear your seatbelt when using this machine. 

ALWAYS 

check fuel lines and fittings frequently for cracks or leaks. Replace if necessary. 

ALWAYS 

keep hands and feet away from moving or rotating parts. 

ALWAYS 

store fuel in approved safety containers. 

ALWAYS

 shut of gas flow valve when transporting machine. 

WARNING: Important 

Do not run this machine without exhaust elbow attached. 

 

DO NOT

 run this machine with a cracked or damaged impeller under any circumstances

 

Summary of Contents for Z FORCE FZ1300H
















Reviews: