background image

 

 

Part No 791108

 

 

        

Form No F111008B 

 

6

MM Owner’s Manual 

 

SOUND

 

 

 

 

 

 

 

 

 

 

 

 

 

 

   

 

 

SOUND LEVEL 93 dB(a) at Operator Position 

 
 
Sound tests were conducted in accordance with 2000/14/EEC, and were performed on 6/18/07 under the conditions 
listed below.

 

 

Sound power level listed is the highest value for any model covered in this manual. Please refer to serial plate on 

the unit for the sound power level for your model.

 

 
 
 
 
 
 
 

 
 

VIBRATION DATA 

 

VIBRATION LEVEL 0.11g 

 

Vibration levels at the operator’s handles were measured in the vertical, lateral and longitudinal directions using 
calibrated vibration test equipment. Tests were performed on 7-10-07 under the conditions listed below.

 

 
 
 
 
 
 
 
 

INTENDED USE 

 

INTENDED USE: 

This machine is designed for vacuuming leaves, grass clippings and other types of organic litter. 

Debris mixed with cans, bottles and small amounts of sand can be vacuumed; however, it is not this machine's 
primary purpose. Vacuuming cans, bottles and sand will affect the longevity of your machine. 

 

Do not operate if excessive vibration occurs. If excessive vibration occurs, shut engine off immediately and check 
for damaged or worn impeller, loose impeller bolt, loose impeller key, loose engine or lodged foreign objects. Note: 
See parts list for proper impeller bolt torque specifications. (See trouble shooting section on page 13). 

 

 
 
 
 

General Conditions:                                                                                             Cloudy 
Temperature: 

                                                                                           74

o

F (23.2

o

C) 

Wind Speed: 

                                                                                           3.7 mph (21.6 kmh)

 

 

Wind Direction: 

                                                                                           South 

Humidity: 

                                                                                           83.5% 

Barometric Pressure:                                                                                           29.8 Hg (756 mm Hg

)

 

General Conditions:                                                                                                   Sunny 
Temperature: 

                                                                                                 86

o

F (17

o

C) 

Wind Speed: 

                                                                                                 13 mph (20 kph)

 

 

Wind Direction: 

                                                                                                 North 

Humidity: 

                                                                                                 49% 

Barometric Pressure:                                                                                                 29.8”Hg (756mm Hg

)

 

Summary of Contents for DL2500SMM

















Reviews: