Billion BiPAC 8700NEXL R2 User Manual Download

Page: 7 / 218

Features

• Compliant with all ADSL2+/VDSL2 standards

• IPv6 ready (IPv4/IPv6 dual stack)

• Triple WAN approach – VDSL2/ADSL2+, 3G/4G LTE mobile connection, and Ethernet

WAN for Broadband Connectivity

• 5-port Ethernet switch

• 1-port (Port#5) Gigabit Ethernet WAN (EWAN) port for broadband connectivity.

• 1 USB ports for 3G/4G LTE USB modem

• IEEE 802.11 b/g/n compliant Wireless Access Point with Wi-Fi Protected Setup (WPS)

• Wi-Fi Protected Access (WPA-PSK/ WPA2-PSK) and Wired Equivalent Privacy (WEP)

support

• Supports WDS repeater function

• SNR adjustments to achieve highest sync speeds

• Monitoring of individual LAN/WAN traffic

• Universal Plug and Play (UPnP) Compliance

• QoS for traffic prioritization and bandwidth management

• SOHO firewall security

• Auto failover

• Supports IPTV application

• Ease of use with quick installation wizard (EZSO)

• Broadcom chipset for better stability

• Ideal for Home and SOHO users

VDSL2/ADSL2+ Compliance

Compliant with xDSL Standard

- Full-rate ANSI T1.413 Issue 2

- ITU-T G.993.2 (VDSL2, supporting profile 8a, 8b,8c, 8d, 12a, 12b, 17a)

- ITU-T G.992.1 (G.dmt)

- ITU-T G.992.2 (G.lite)

- ITU-T G.992.3 (G.dmt.bis)

- ITU-T G.992.3 Annex M (ADSL2 Annex M)

- ITU-T G.992.4 (G.lite.bis),

- ITU-T G.992.5 (G.dmt.bis plus)

Summary of Contents for BiPAC 8700NEXL R2



























































































































































































































Search results

Summary of Contents for BiPAC 8700NEXL R2

Reviews:

Related manuals for BiPAC 8700NEXL R2

Brands by name

Popular brands

Billion BiPAC 8700NEXL R2, User Manual

Search results

Summary of Contents for BiPAC 8700NEXL R2

Reviews:

Related manuals for BiPAC 8700NEXL R2

Brands by name

Popular brands