Billion BiPAC 8700NEXL R2 User Manual Download

Page: 106 / 218

102

Bridging

VPI/VCI:

Enter the VPI/VCI combination from you ISP.

Encapsulation Mode:

Select the encapsulation mode, LLC/SNAP-BRIDGING, or VC/MUX.

Description:

User-defined description for the connection, commonly for friendly use.

802.1P Priority:

The parameter indicates the frame priority level from 0 (lowest) to 7 (highest), which

can be used to prioritize different classes of traffic (voice, video, data, etc). Enter the priority
identification, tagged: 0-1, untagged: -1.

802.1Q VLAN ID:

It is a parameter to specify the VLAN which the frame belongs. Enter the VLAN ID

identification, tagged: 0-4094, untagged : -1.

Allow as IGMP Multicast Source:

Enable to support the “source filtering” which is the ability for a

system to report interest in receiving packets “only ” from specific source address(es), or “all but”
specific source address(es), sent to a particular multicast address.

Note:

It works only on IGMP

version 3.

Allow as MLD Multicast Source:

Used in a similar way by IPv6 system as IGMP Multicast source

in IPv4 system. Enable it to support the source filtering functionality for IPv6 system.

Note:

It works

only on MLD version 2.

Summary of Contents for BiPAC 8700NEXL R2



























































































































































































































Search results

Summary of Contents for BiPAC 8700NEXL R2

Reviews:

Related manuals for BiPAC 8700NEXL R2

Brands by name

Popular brands

Billion BiPAC 8700NEXL R2, User Manual

Search results

Summary of Contents for BiPAC 8700NEXL R2

Reviews:

Related manuals for BiPAC 8700NEXL R2

Brands by name

Popular brands