Billion BiPAC 8700NEXL R2 User Manual Download

Page: 53 / 218

3G/4G LTE Status

Status:

The current status of the 3G/4G LTE connection.

Signal Strength:

The signal strength bar and dBm value indicates the current 3G/4G-LTE signal

strength. The front panel 3G/4G LTE Signal Strength LED indicates the signal strength as well.

Network Name:

The name of the 3G/4G LTE network the router is connecting to.

Network Mode:

The current operation mode for 3G/4G LTE module, it depends on service provider

and card’s limitation, GSM or UMTS.

Card Name:

Given a name for the embedded 3G/4G LTE module.

Card Firmware:

Current used FW in the 3G/4G LTE module.

Current Received (RX) /Transmitted (TX) Bytes:

Current Rx/TX (receive/transmit) packets in Byte

Total Received (RX) /Transmitted (TX) Bytes:

The total Rx/TX (receive/transmit) packets in Byte

Total Connection Time:

The total of 3G/4G LTE dongle connection time since the 3G/4G LTE is up

and running

Summary of Contents for BiPAC 8700NEXL R2



























































































































































































































Search results

Summary of Contents for BiPAC 8700NEXL R2

Reviews:

Related manuals for BiPAC 8700NEXL R2

Brands by name

Popular brands

Billion BiPAC 8700NEXL R2, User Manual

Search results

Summary of Contents for BiPAC 8700NEXL R2

Reviews:

Related manuals for BiPAC 8700NEXL R2

Brands by name

Popular brands