60
If you want to enable the RADIUS service, check Enable and then do the following settings.
WEP Authentication:
If you enable
RADIUS/802.1x,
then the default
WEP
Authentication
is
Open System.
RADIUS Server IP Address:
Enter the IP address of RADIUS authentication server.
RADIUS Server Port:
Enter the port number of RADIUS authentication server here.
Default value is 1812.
RADIUS Shared Secret:
Enter the password of RADIUS authentication server.
Click Apply to confirm the settings.
Note: For information about settling Radius/802.1x, please refer to
WLAN
setup section.
