12
2.4 The Rear Ports
Port
Description
1 Antenna
Connect the antenna to this port.
2 ON/OFF
Power ON/OFF switch.
3 Power
Connect the supplied power adapter to this jack.
4 Reset
After the router is powered on, press this reset button using the
end of paper clip or other small pointed object for 6 seconds and
above to restore it to factory default settings.
1. Recovery procedures for non-working routers (e.g. after a
failed firmware upgrade flash).
2. Recovery procedures for a lost web interface password.
5 WPS
Press the WPS button acoording to the following two to achieve
different functions.
2-5 seconds: start WPS.
5 seconds above: switch to enable/disable WLAN.
6 Ethernet
Connect a UTP Ethernet cable (Cat-5 or Cat-5e) to one of the
four LAN ports when connecting to a PC or an office/home
network of 10Mbps or 100Mbps.
Note: Only Ethernet port 1 can be used for EWAN.
7 DSL
Connect the supplied RJ-11 (“telephone”) cable to this port when
connecting to the ADSL/telephone network.
