Billion BiPAC 7300W User Manual Download

Page: 131 / 139

128

5.3.9.6 IGMP

IGMP, known as Internet Group Management Protocol, is used to management hosts from

multicast group.

IGMP Proxy:

Accepting multicast packet. Default is set to

Disable.

IGMP Snooping:

Allowing switched Ethernet / Wireless to check and make correct

forwarding decisions. Default is set to

Disable.

5.3.9.7 SNMP Access Control

Software on a PC within the LAN is required in order to utilize this function – Simple Network

Management Protocol.

SNMP V1 and V2:

Read Community:

Specify a name to be identified as the Read Community, and an IP

address. This community string will be checked against the string entered in the

configuration file. Once the string name is matched, user obtains this IP address will be able

to view the data.

Write Community:

Specify a name to be identified as the Write Community, and an IP

address. This community string will be checked against the string entered in the

configuration file. Once the string name is matched, users from this IP address will be able to

Summary of Contents for BiPAC 7300W












































































































































Search results

Summary of Contents for BiPAC 7300W

Reviews:

Related manuals for BiPAC 7300W

Brands by name

Popular brands

Billion BiPAC 7300W, User Manual

Search results

Summary of Contents for BiPAC 7300W

Reviews:

Related manuals for BiPAC 7300W

Brands by name

Popular brands