Billion BiPAC 5200N RC, User Manual

Page: 54 / 79

52
DSCP Range: Set the DSCP value that you want to filter.
802.1p: Set the remarked new 802.1p priority value on the packet that fulfill every detail
setting condition of each rule.
Action
After finishing all rules detail condition setting, select the rule you want to execute and action
here.
IPP/DS Field: Select IP QoS format.
IP Precedence Remarking: Select the remarking value of IP precedence.
Type of service Remarking: Select the remarking value of type of service.
DSCP Remarking: Select the remarking value of DSCP.
802.1p Remarking: Select the remarking value of 802.1p.
Queue #: Select four types of Queue: Low, Medium, High, Highest.
4.3.4 ADSL
ADSL Mode: The default setting is Auto Sync-Up. This mode will automatically detect
your ADSL, ADSL2+, ADSL2, G.DMT, G.lite, and T1.413. But in some area, multimode
cannot detect the ADSL line code well. If it is the case, please adjust the ADSL line code to
G.DMT or T1.413 first. If it still fails, please try the other values such as ALCTL, ADI, etc.
ADSL Type: There are five modes “Open Annex Type and Follow DSLAM’s
Setting”, ”Annex A”, ”Annex I”, “Annex A/L”, ”Annex M” and “Annex A/I/L/M” that user can