Billion BiPAC 4700AZ User Manual Download

Page: 86 / 189

General Setting

This section is to setup setup HotSpot server on a router and authentication medthods, session
settings.

General Setting:

Hotsport:

Activate or Deactivate Hotspot feature.

Interface:

Determine

which SSID is configured as a Hotspot. Industrial LTE Router has 4 virtual

SSIDs. Now it is fixed on SSID1(WLAN1), it can be select in the future.

IP Address/ IP Subnet Mask:

The IP Subnet assigned to this Hotspot network. The IP can be

changed according to different user

’s need.

Primary/ Secondary DNS:

The DNS information assigned to this Hotspot network, passed on to the

hotspot clients. Change if needed.

Login Mode:

Authentication or Agreement.



Authentication:

when authentication is selected, client needs to provide authenticated

account, either via external RADIUS server or built-in user account database, to login to access

Summary of Contents for BiPAC 4700AZ






























































































































































































Search results

Summary of Contents for BiPAC 4700AZ

Reviews:

Related manuals for BiPAC 4700AZ

Brands by name

Popular brands

Billion BiPAC 4700AZ, User Manual

Search results

Summary of Contents for BiPAC 4700AZ

Reviews:

Related manuals for BiPAC 4700AZ

Brands by name

Popular brands