69
Wireless 2.4G MAC Filter
The MAC filter screen allows you to configure the router to give exclusive access to up to 8 devices
(Allow Association) or exclude up to 8 devices from accessing the router (Deny Association). Every
Ethernet device has a unique MAC (Media Access Control) address. The MAC address is assigned at
the factory and consists of six pairs of hexadecimal characters, for example, 00:AA:BB:00:00:02.
You need to know the MAC address of the devices you wish to filter.
SSID Index:
Select the targeted SSID you want the MAC filter rules to apply to.
Active:
Select
Activated
to enable MAC address filtering.
Action:
Define the filter action for the list of MAC addresses in the MAC address filter table.
Select
Deny
to block access to the AP, MAC addresses not listed will be allowed to access the router.
Select
Allow
to permit access to the router, MAC addresses not listed will be denied access to the
router.
MAC Address:
Enter the MAC addresses (in XX:XX:XX:XX:XX:XX format) of the wireless station that
are allowed or denied access to the specified in these address fields.
Summary of Contents for BiPAC 4700AZ
