Bilanciai D400, Use, Maintenance And Installation Manual

Page: 39 / 59

14.2.8 Setup Menu/DIGITAL scale/Test
Angular coefficient The following information is given alongside
the identification number of each individual
cell:
✔
the correction made through angular
calibration of the cell, recorded in the cell;
✔
the same correction recorded in the
terminal.
The angular coefficient values of the cells
recorded in the terminal can be changed.
Proceed in the following way:
✔
press
EDIT
;
✔
enter the N° cell to be changed as
explained in the Use of the terminal chapter
of the user manual and press
ENTER
to
confirm;
✔
enter the numerical value of the Modified
Coefficient as explained in the Use of the
terminal chapter and press
ENTER
to
confirm;
✔
use the arrow
←
to copy the angular
coefficient values of the cells recorded in
the terminal on the angular coefficient
values recorded in the cells;
✔
use the arrow
→
to carry out the reverse
operation.
Consult the Personalization chapter of the advanced user manual for all
the other parameters in this menu.
D400
3-39