www.B-TEK.com
2016
Pit Type Truck Scale Installation Manual
12
Completely tighten the four 3/4” mounting bolts and nuts through the
four holes on the bottom flange of main beams of the end module. The
end closest to the end wall has the mounting plates welded to the
bottom flanges of the main beams.
Secure the 4-way chains from the
crane to crossmembers or the outrig-
gers that are welded to the sides of the
weighbridge module.
Prior to installing the weighbridge mod-
ule onto the dummy load cell stands
ensure that safety supports such as
wood blocking is placed under the
weighbridge module being lifted.
Lift the end module with the 8-hole upper receiver plate already bolted in place over the four dummy cell stand
assemblies and slowly lower the module so that the button on top of each dummy stand is inserted into the thru
hole located in each mounting plate. Hydraulic jacks can be also be used to help position the modules onto the
dummy stands.
End Module Upper Receiver Plate Shown
with Load Cell Mount Assembly
8-Hole Upper Receiver Plate Shown
with Load Cell Mount Assembly
Summary of Contents for BTEK BS-FECD-P-CPD-M
Page 1: ...BS FESD P CPR M BS FESD P CPD M BS FECD P CPR M BS FECD P CPD M Models Include ...
Page 2: ...www B TEK com 2016 Pit Type Truck Scale Installation Manual 2 ...
Page 22: ...www B TEK com 2016 Pit Type Truck Scale Installation Manual 22 See larger drawing in packet ...
Page 23: ...2016 www B TEK com Pit Type Truck Scale Installation Manual 23 See larger drawing in packet ...