17
1.
2.
3.
4.
5.
When adjusting the air pressure,always wear safety glasses
and gloves,since the dropper post contains high pressures
and suspension fluid!
Always hold your post right side up,when adjusting air
pressure.
Never operate the air val
v
e,while the post is laying
horiz
o
ntally
or upside down
or you will cause suspension fluid
to leak out of
the post under
high pressu
r
e! This can cause
severe injuries!
ADJUSTING RETURN SPEED
Your REVIVE comes with a factory setting of
240
~2
50
psi in air
pressure. This pressure will provide a good balance between
return speed an lever force.
However, if you feel your retur
n
speed is too slow, you can
make your post faster by increasing air pressure up to a
maximum of 260psi
Reset the post and
extend to maximum length before
adjusting air pressure
. Let the post rest for 30 seconds.
Remove saddle clamp parts.
Move the reset lever to upward position using a 4mm Allen
key.
Remove the small valve cover/plug from the valve housing.
Do not lose this small plug since it is essential for proper reset
function.
Attach the air valve adapter and the
n
attach the shock
pump onto the adapter
