page 23
8.
Pull the approx. 1m long cable into the battery compartment.
The 4-pin connector must reach up to the top of the upper
battery holder.
Then plug all the other connectors removed in step 2 back into
the motor. Use the slots from which you previously removed the
plugs.
Again, the connectors are coded and can only be inserted the
right way round and into the appropriate slot.
Then stow all cables in the opening and close the cover removed
in step 1. Screw it back in place with the 3 screws.
Also screw the lower battery holder from step 3 back on.
Summary of Contents for RealSpeed
Page 29: ...page 29 ...
Page 30: ...page 30 ...
