page 26
13.
Disconnect the black round connector to the display. The end
that comes out of the frame through the cable guide that has just
been removed can be pushed back into the frame.
Then, inside the frame, connect the two black, round connectors
of the bikespeed-RS to the connectors of the display that have
just been disconnected.
The best way to do this is to first connect the cable that has been
pushed back into the frame and then guide the other connector
on the bikespeed-RS through the opening of the cable gland to
the outside and connect this to the connector of the display.
Important:
If you have installed a Sigma Remote 500 together
with a Sigma View 1200 display on your bike, the display and the
remote are connected to the motor via a Y-cable. The bikespeed-
RS must then be connected between the motor and this Y-cable,
not
between the display and the remote!
Then screw the cable grommet removed in step 12 back on.
Summary of Contents for RealSpeed
Page 29: ...page 29 ...
Page 30: ...page 30 ...
