Bikespeed RealSpeed, Instructions For The Installation And Description Of The Functions

Page: 14 / 32

page 14
Help in case of problems
If your bikespeed-RS does not work correctly at any given time, please
check the following steps to help yourself.
Should you still have problems please write an email before sending back
the bikespeed-RS.
Cause Solution
- bicycle does not start or
deactivates itself
immediately - Please check whether the battery is
properly engaged in the bracket.
- Please check the 6-pole connector from
the tuning to the motor and to the display
.
- no animation visible
when starting the bicycle - Please check if the service-mode is
activated as by entering the combination.
- Check the 4-pole connector from
bikespeed-RS to the 1m cable in the
direction of the motor.
- Check the 3-pole connector from this
cable to the motor.
- no support or rather
only briefly when starting
- no speed-indication (0
km/h) - Check the 4-pole connector from
bikespeed-RS to the 1m cable in the
direction of the motor.
- Please check the 3-pole connector from
this cable to the motor and to the speed-
sensor
- support only until up to
25 km/h are reached
- miles are missing - Check if the tuning is activated and
service-mode is off.
Continue next page.