5
3. Set Up Your BikeComm Headset
The three main functions of BikeComm headset are (1) calling/answering cell
phone, (2) receiving audio (music, and/or GPS instruction) from other wireless
devices, and (3) intercom with other BikeComm headsets. Each button of the
BikeComm headset is designed for multiple function settings, and the following
section will guide you through in setting up your BikeComm headset.
Power and LED Indicator:
1. Power ON: Press[MFB] button until the LED turns blue then release it.
Power OFF: Press [MFB] button until the LED turns red then release it.
2. Recharge: During recharging, the LED remains red. When finished
recharging, the LED light is off. It takes about 2.5 hours to fully recharge the
battery.
3. Low Battery Warning: when the battery is low, you can hear three <beep>
sounds, i.e.,<beep,beep,beep> as a reminder.
Summary of Contents for EZ-02
Page 4: ...4 ...
