background image

settings are also saved. Note: “Incoming Call Ring” of iPhone can't be set here. 

 

 

8.Warranty Policy / 

8.1 A 12-month warranty period for headset and a 3-month warranty period for accessory from date of 

purchase are provided.   

8.2 The product is shipped under strict quality control. In case of malfunction, the warranty applies only to the 

headset. Costs incurred by accessories, parts, maintenance costs, and upgrades are not covered by the 
warranty. 

8.3 Please note that the warranty may not be applicable if the appearance of the headset shows a severe 

damage or a crack. 

8.4 In case repair is required during warranty, you must provide proof of purchase to confirm the date of 

purchase. If you are unable to provide proof of purchase, the warranty period will be counted starting on 
the product shipping date. Contact your local dealer or our company. Please note that the sending of the 
product may not be accepted when you do not contact local deal or us in advance. 

8.5 Please note that certain cost may still incur on rare occasions even within the warranty period. 

 

9.G-Sensor Operation / 

By tapping on the headset, G-Sensor is activated to trigger various functions. G-Sensor sensitivity level could 
be adjusted by BK-T1 Tool Program downloaded from www.openroad.com.tw. 

 

 

Summary of Contents for BK-T1









Reviews: