Operating Manual Nr.
057-2-6-0014-R0
Page 29
Version 2021
EN
8.4
Cleaning
8.4.1
Initial cleaning
The machine does not require particular initial cleaning, but it is a good practice to clean the
transit areas of the motorcycles by removing oil and dust to prevent the slip during loading.
Wear water-repellent gloves. Perform the cleaning operations wearing anti-cut
gloves resistant to the substances used (follow the safety data sheet).
CAUTION:
Make sure there are no foreign bodies inside the lifting platform and
especially in the sliding guides of the shears and on the rack (6) where the
safety bar operates.
CAUTION:
Any Cleaning and Maintenance operation must be carried out with
the safety bar inserted.
Keep the operator’s work area clean.
The cleaning operations concern:
The machine in general;
The operator’s standing areas.
Dispose the liquids and consumables used in the appropriate landfills, according to the
legislation of the country.
The cleaning of the lifting platform can be carried out by personnel without specific technical
skills, who however know the main characteristics of the machine in order to avoid dangerous
situations.
8.4.2
General cleaning of the machine
Perform the general cleaning of the machine weekly with the utmost care.
Remove foreign substances: you can use non-corrosive detergents for ferrous and rubber
material. These detergents must not be harmful to the operator (follow the instructions
contained in the safety data sheets of the substances used, also for the selection of PPE worn
by the operator during work).
The use of water jets and flammable liquids is FORBIDDEN
The use of self-cleaning cloths is recommended
The support surfaces and locking blocks of the safety bar must be carefully cleaned to remove
traces of oil or grease.