Operating Manual Nr.
057-2-6-0014-R0
Page 12
Version 2021
EN
a mobile anchoring bar with automatic
coupling which prevents the accidental
descent of the movable surface.
a mechanical safety system consisting of two
toothed bars firmly welded to the base
2.4
Intended use
Disseminate the instructions described in this chapter to all personnel
involved in the preparation and use of the machine.
The machine is intended for lifting motorcycles for maintenance purposes.
The machine has been designed and built for the specified use; a different use and
non-compliance with the technical parameters set by the Manufacturer may be
dangerous for the operators.
It can be used in mechanical motorcycles repair shops both for the mechanical part and
for the bodywork.
Any other use different from the one indicated is to be considered as not
planned and may cause damage to the machine and operators. It is therefore
FORBIDDEN
.
The machine must always be operated by only one operator.
The operator must always work in proper lighting conditions and wear clothes and
protections appropriate to the performed task (daily activity of a mechanical workshop).
The working position of the operator during the ascent and descent phases is in the area
around the machine at the safety distance allowed by the cable length of the control
panel.
It is strictly forbidden to lift motorcycles while leaning on the side
kickstand.
Do not try to lift motor vehicles weighing more than the maximum capacity
of the platform.
Do not try to lift four-wheeled vehicles using two lifting platforms placed
side by side.
Do not stand under the motorcycle when lifted on a “gate” version lift.
