Operating Manual Nr.
057-2-6-0014-R0
Page 16
Version 2021
EN
The lifting piston has a
parachute valve
which locks the cylinder in case the oil cable is
blanked.
ALWAYS keep the mechanical lock hooked
during work, in order to weigh
down the weight of the structure and of the vehicle standing on it also on the
toothed bars at the base.
During the use of the lifting platform it is very important to pay the utmost attention to the
ascent and descent manoeuvres. During the ascent/descent phase the operator is required to
distance from the lifting platform according to the length allowed by the control panel cable.
The personnel who are not in charge of using the lift must not pass or stand in the operating
area of the motorcycle lifting platform.
The machine must always be operated by only one operator.
Once the motorcycle is loaded on the lifting platform, place it in a vice or use the
rear kickstand, then fasten it firmly to the openings and the wheel lock by using a
belt..
GIVEN THE CAPACITY VALUE INDICATED ON THE PLATE:
Do not exceed the load capacity of the lifting platform;
Use it only to lift objects;
Do not modify the lifting platform;
The load must always remain firm and stable.
In order to make the machine safe during the ascent phase:
1-
Let the anchoring bar move freely around the perimeter of the toothed bar on
the base;
2-
When the selected position is reached, leave the bar uncoupled; this will act as a
mechanical stop in case of an uncontrolled fall of the platform.
In order to make the machine safe during the descent phase:
1-
Hook the anchoring bar to the appropriate lock in order not to hinder the
correct descent of the lifting platform;
2-
If the lift is brought to the lower stroke (therefore in a position of minimum
height) the bar will automatically release to allow the ascent; otherwise, select the
chosen position to hook the bar which will act as a mechanical stop in case of an
uncontrolled fall of the structure.