Operating Manual no.
057-2-6-0016-R0
Version 2020
P. 24
EN
It is absolutely forbidden to lift motorcycles while leaning on the side kickstand.
Do not try to lift motor vehicles weighing more than the maximum capacity of the
platform.
Do not stand under the vehicle during maintenance phases.
7.3
Lifting types
7.3.1
Electro-Hydraulic pump –
term code -003
Lifting takes place using the control unit connected to the hydraulic pump.
1
2
3
4
Figure 7
–
control unit
The control unit is equipped with two buttons with maintained action that allow the ascent (Figure
7, [1]) and descent (Figure 7, [2]) of the lift. Once the controls are released the lift stops instantly.
The control unit is equipped with a safety system that stops the operation of one of the two
buttons if the other is enabled.
It is also equipped with the safety sensor release button (Figure 7, [3]).
Figure 7, [4] indicates the casing that allows the replacement of the oil plug specific for transport
(to prevent spillage) with that of normal operation provided with vent. We recommend changing
the plug when using the machine for the first time.
