Operating Manual no.
057-2-6-0016-R0
Version 2020
P. 22
EN
6
Dismantling/scrapping section
6.1
Dismantlement
Follow the materials dismantling Regulations in force in the country where the machine will be
dismantled.
Here are some useful indications in case you must disassemble the machine to reassemble it in
other areas, store it or dismantle it.
6.2
Mechanical dismantling
Before proceeding with mechanical dismantling of the machine, carefully clean the whole
structure (see
Cleaning and Maintenance
chapter).
Before removing the machine from its housing, remove all moving parts by proceeding to the
opposite of what is described in the
Installation
chapter.
For the lifting modes and the relative specific safety precautions, refer to the
Transport, Handling
and Storage
chapter.
6.3
Scrapping
The dismantling operations of the machine must be carried out in total safety by using the
protections.
At the end of the machine's life it is necessary to proceed to the proper dismantling of the
components that are listed with reference to the interested party:
Support structure: Fe 360/S235
Hydraulic cylinder: Fe 360/S235
Paint: Epoxy powder
Gaskets: Polyurethane rubber
Oil: Hydraulic ISO VG 1O (W32)
Dismantle the different types of machine components in appropriate landfills. Always comply
with the Legislation in force in the Country of use.
