6
www.bikefriday.com
800-777-058
•
+1-541-687-0487
Your
tikit™
will only require a small amount of assembly. You’ll
need the 5mm hex wrench you’ll find included with your
tikit™
, a
pedal wrench or 15mm wrench, and a pair of scissors to cut the zip
ties securing the frame to the box.
Unpacking your
tikit™
from box
1. Take the bike and accesso-
ries out of the box. Remove
all packaging.
4. Install the front wheel.
Quick release lever should be
on the right side so as not to
impede the fold.
(for use of the quick release
lever see page 13)
2. Unfold the bike frame
before installing the front
wheel.
(see instructions on pg. 10)
3. With the bike unfolded,
make sure the cables aren’t
twisted or snagged. Slide the
stem into place and tighten
the stem clamp.
