4
www.bikefriday.com
800-777-058
•
+1-541-687-0487
5. Remove Front Wheel
After removing the front wheel, close
the brake again. Remove the quick
release from the axle by undoing the
knurled nut. Be careful not to lose the
small cone-shaped springs.
2. Open Front Brake
To release your front V-brake, press
the arms together, and then pull the
elbow-shaped noodle out and up
while pushing the noodle holder
down. There is a slot in the end of
the noodle holder for the brake cable
to slip out.
Packing your
tikit™
in its suitcase
3. Remove front fender (see page
16). If you have a front rack you
must remove it also (see page 17)
6. Loosen stem clamp where unpainted
stem riser enters the folding stem.
Remove handlebars and stem and put
on protective covers.
5. Remove seatpost/saddle and
put on their protective covers.
See * at bottom of page 25 if you
have a small
tikit™.
1.
Put bike in lowest gear (1 on shifter)
4.
Fold Pedals
NOTE: If you have a Model T.,
completely remove the spin knob
and latch. Place in tool bag.
Loosen the seat mast clamp using
your 4 mm hex wrench.
