page 7
To adjust the height of the handlebars,
unlock the steering tube by pulling outward
on the quick-release lever. Slide the T-tube
to the desired position and secure by
locking spring-loaded button in place and
by pushing inward on the quick release
clamp
(Fig. 16)
.
The tension of the quick release clamping
mechanism can be adjusted by tightening
or loosening the Allen bolt. Be careful not
to over-tighten. You should always be able
to open and close the quick-release lever
by hand and the T-tube should telescope
freely with the clamp open.
Warning: FaiLUre TO PrOPerLY engage
THE QUICK-RELEASE CLAMP AND THE
sPring-LOaDeD BUTTOn MaY CaUse THe
T-BAR TO MOVE WHICH MAY CAUSE INjURY.
2.BasKeT aTTaCHMenT anD MOUnTing
(Fig. 17)
Most types of baskets
can be
mounted on this adapter.
Place the lower basket mounting
plate roughly in the center of the
basket. Bolt the Top mounting plate
through the basket to the lower
plate.
This is done in a sandwich- like
manner. Secure all four mounting
lock washers and nuts using a
wrench. Place the Basket attachment
receptor onto the Fork base unit
stem. engage the spring-loaded
button and tighten the quick-release
clamp.
Note: Mounting plate positioning may need to be altered to accommodate different
baskets.
Figure 16
Figure 17
