page 5
seCtIon V
strut arm mountinG
loosely connect the strut arm to the seat post clamp
(Fig. 12a)
. if needed, remove
plastic grommet for larger size seat post bolts.
An alternate seat post clamp is also included with your Bike Balance unit
(Fig. 12b)
.
Use
only
if the present bicycle manufacturer does not have a clamp suitable for
proper installation.
When using the
alternate seat post clamp
, unscrew the hub nut and remove
nylon spacer. reposition the spacer between the strut arm and the U-clamp
(Fig. 13a & 13b)
. loosely re-install hub nut. Follow adjustment procedures in
SECTION VI
.
Figure 12a
Figure 12b
Figure 10
Figure 11
