1
Linkage Stopper
2
Plastic tube (2x650mm)
Fuel tank (800cc)
1
6
Screw (3x30mm)
6
Washer(3x6mm)
1
Ply plate (3mm)
The side view when the engine install completion.
Install the scale exhaust tubes and the cowling wooden
frame in place on the fuselage with screws, assemble the
engine to the engine mount.
The picture of the cowling wooden frame to the cowling.
Fix the cowling to the cowling wooden frame with TP screws.
Put the the cowling frame and the exhaust template on
the firewall place, mark the exhaust position out base on
the exhaust template.
173mm
1
1.5mm
TP Screw (2.3x12mm)
6
TP Screw (2.3x12mm)
6
TP Screw (2.3x12mm)
14
TP Screw (2.3x8mm)
14
TP Screw (2.3x8mm)
6
Screw (3x30mm)
6
Washer(3x6mm)
7
Scale exhaust tubes
7
Scale exhaust tubes
3
Screw (3x15mm)
3
Washer(3x6mm)
1
1
1
1
Antenna
Canopy (PVC)
Canopy (PVC)
Canopy (PVC)
Exhaust template (3mm)
1
Cowling Wooden Frame
Exhaust template (3mm)
Cowling Wooden Frame
1
Drop tank
1.5mm
Screw (3x30mm)
Scale exhaust tubes
TP Screw (2.3x8mm)
100mm
265mm
225mm
39
41
42
43
8
40
Accessory list for the coming installation steps.
Trim a slot in the stabilizer base on the mark, put the servo of elevator into the
stabilizer through the hole in the wing root,install the servo to appropriate possition
with screws and epoxy the horn to the slot in the elevator.
Masking tape
Horn
4
The sketch map after the stabilizer and elevator
assemble completely.
Assemble the fixed stabilizer to the fuselage carefully and put the other
stabilizer to the fuselage through the fiber tubes, drill holes carefully to the
carbon fiber tube through the holes in the stabilizer and fix the stabilizer.
The sketch map after the stabilizer and elevator
assemble completely.
Mark out the position of the elevator servo on the stabilizer.
Measure the deepth to confirm what the servo position
will be as illustration.
Screw (2.6x12mm)
2
2
Washer(3x8mm)
Screw (2.6x12mm)
Washer(3x8mm)
1.5mm
Screw (2.6x12mm)
Washer(3x8mm)
1.5mm
Screw (2.6x12mm)
2
2
Washer(3x8mm)
B'
A
A'
B
Make sure to glue securely.
If not properly glued, a failure in flight may occur.
Temporarily fasten down the main wing and
check its correct position.
Securely glue together.If coming off during flights,
you'll lose control of your airplane which leads
to accidents!
A = A '
B = B '
2
Carbon fiber stab bolt tube(12x480mm)
Carbon fiber stab bolt tube(12x480mm)
23
25
24
26
5
27
Accessory list for the coming installation steps.
22
