Bigben QuickFire II, User Manual

Page: 9 / 26

9
POR
TUGUÊS IT
ALIANO
ESP
AÑOL
NEDERLANDS
DEUTSCH
FRANÇAIS
ENGLISH
03. Hold again to switch it back Off.
04. Controller emits a beep to indicate that Quickfi re is off.
05. The Rapid fi re icon will also change colour to show that it is on or off.
Sniper mode*
The Sniper mode allows you to adjust the sensitivity and dead band of
the right stick for better aiming. This mode is programmable to let you
fi nd the best setting.
Sensitivity can be adjusted from 20% to 100% in 5% increments. Dead band
cancellation can be adjusted from 0 to 30% in 2% increments. By default,
sensitivity is set to 50% and deadband is 10%.
Sniper mode is switched off by default and the icon will appear red.
To switch it on enter the settings screen, select the sniper mode and select Y.
The sniper mode icon will then appear green.
To set the sensitivity, follow these steps:
01. Short press the Home button to enter the settings page mode.
02. Select the Sniper mode icon on the menu with left stick, and press start to
enter mode setting.
03. Move the left stick right to the ‘S’ position to adjust the sensitivity.
04. Move the left stick up or down to increase or decrease the amount of
sensitivity you want on the stick.