Bigben QuickFire II, User Manual, Page: 10 / 26

10
ENGLISH
FRANÇAIS
DEUTSCH
NEDERLANDS
ESP
AÑOL
IT
ALIANO
POR
TUGUÊS
05. Move the left stick right to the ‘T’ position to adjust the deadzone threshold.
06. Move the left stick up or down to increase or decrease the amount of
deadzone you want on the stick. A lower deadzone will mean that the stick
will move at the slightest touch. A higher deadzone will mean that you will
need to move the stick more before it will activate.
07. Press select to confi rm your selection and return to the menu screen.
Sniper mode toggle on \ off :
The Sniper mode can be switched on and off on during play using the buttons
underside the controller.
To switch on /switch off Sniper mode, follow these steps:
01. Hold the left button for less than1 second to switch Sniper mode On.
02. Controller emits 2 beeps to indicate that the mode is On.
03. Hold the left button for less than1 second to switch it back Off
04. Controller emits a beep to indicate that Sniper mode is off.
05. The Sniper icon will also change colour to show that it is on or off.
Duck and Fire mode (D&F)*
The duck and fi re mode instantly makes your character go prone or
crouch and shoot, so you can evade the enemy and take them out.
This mode is programmable as it depends on the game and buttons
used to duck and crouch.
By default, button mapping is the current fi ring button and O button for
crouch. D&F is off by default and the icon is red. To switch it on enter the
settings screen, select the duck and fi re mode and select Y. The duck and fi re
mode icon will then appear green.