Bigben QuickFire II, User Manual

Page: 7 / 26

7
POR
TUGUÊS IT
ALIANO
ESP
AÑOL
NEDERLANDS
DEUTSCH
FRANÇAIS
ENGLISH
To set the custom fi ring rates follow these steps:
01. Short press the Home button to enter the settings page mode.
02. Select the Rapid fi re icon and press the start button.
03. Use the left stick to move to the M1 position in the settings screen.
04. Move the left stick up or down to the M6 position.
05. When M6 is selected, move the left stick to the right to select the shots per
second rate (SPS).
06. Move the left stick up or down to adjust the fi ring rate to your desired
selection.
07. Press select to confi rm your selection. The screen will then return to the
home page.
08. The controller will now fi re at your chosen speed when you press R1. Please
note that some guns in some games may not function correctly at certain
rates. You will need to experiment to fi nd out which rate works best for your
game.
Programming other buttons for Quickfi re mode
By default, only the R1 button is used for Quickfi re, but if you are playing games
that use another button for fi ring, you can also program.
To set other buttons for Quickfi re, follow these steps:
01. Short press the Home button to enter the settings page mode.
02. Select the Rapid fi re icon and press the start button.
03. Move the left stick to select the rapid fi re button selections at the bottom of
the screen. R1 should currently be shown.
04. Now press any other button you wish to assign as rapid fi re, R2 for example.
R2 will now be displayed at the bottom of the screen, alongside R1.
05. You can select up to 4 different buttons for the rapid fi re action. To switch
them off again, just press the same button again.