Push the [Set switch]
Buzzer sounds
[Pi: ]
Adjust the levels
of base level
Blue LED is on
Buzzer sounds
[Pi, Pi, Pi ]
③
Push the [Set switch] once again. Buzzer sounds [Pi: ]
and calibration is completed.
④
Adjust levels of X & Y axis of base level within 0.1
micron.
If one of 2 levels is adjusted within 0.1 micron, Blue
LED is on and buzzer sounds [Pi, Pi]. When both of 2
axis are adjusted within 0.1 micron, Blue LED is on
and buzzer sounds [Pi, Pi, Pi].
↓
See Page No.9→
How to calibrate in High Mode
