(5) In Low mode, adjust the level and make LED (
BLUE
) light on. When LED (
BLUE
) is on, the inclination is within 0.1mm.
When only 1 of 2 axis (X,Y) is adjusted until inclination= within 0.1, LED (
BLUE
) blinks and buzzer makes sound like “Pi, Pi”
When both of 2 axis (X,Y) is adjusted until 0.1 inclination, LED (
BLUE
) lights on and the buzzer makes sound like “Pi, Pi, Pi”.
LED (
BLUE
) blinks
Buzzer makes sound
(6) Change Mode from Low to High.
