17
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
Step 3: Swing Beam Assembly
Make sure triangle is
tight against beam
Warning: For your child’s safety,
orientate the swing hangers as
shown to ensure your swing will
have proper swing motion when
installed. Failure to do so could
result in premature failure of the
swing hanger or swing chain.
A:
In the middle holes of (1825) Back Beam install
2 Bolt-Thru Swing Hangers (fig. 3.1) making sure
the swing hangers are oriented in the direction
shown in fig. 3.4 to maintain proper swing motion.
B:
In the end holes of (1826) Front Beam install 4 Bolt-
Thru Swing Hangers (fig. 3.1) making sure the swing
hangers are oriented in the direction shown in fig. 3.4 to
maintain proper swing motion.
Fig. 3.4
C:
Attach 1 Triangle Plate
to the ends of each (1826)
Front Beam and (1825) Back
Beam using 1 (G1) 5/16 x
1-1/2” Hex Bolt (with lock
washer, flat washer and
t-nut) in the hole indicated in
fig. 3.2 & 3.3.
Correct hole
usage is very important.
Important!
Swing End
(With Overhang)
Important!
Fort End Side
(No Overhang)
D:
Attach 1 (H7) 1/4 x 5-1/2” Hex Bolt (with lock washer, flat washer and t-nut) to the ends of each (1826) Front
Beam and (1825) Back Beam. The bolts do not attach to anything, but
MUST
be installed to the beams to prevent
splitting and checking of wood. (fig. 3.2 & 3.3)
Swing End
(With Overhang)
Fort End Side
(No Overhang)
Wood Parts
Hardware
Bolt-Thru
Swing Hangers
4 x
1/4 x 5-1/2” Hex Bolt
(1/4” flat washer, 1/4” lock washer, 1/4” t-nut)
4 x
5/16 x 1-1/2” Hex Bolt
(5/16” flat washer, 5/16” lock washer, 5/16” t-nut)
H7
G1
1 x Bolt-Thru Swing Hangers (pkg of 6)
1 x Triangle Plate (pkg of 4)
1 x
Front Beam 2 x 6 x 83-5/8”
1 x
Back Beam 2 x 6 x 83-5/8”
1826
1825
Triangle
Plates
G1
H7
1826
1825
1/4” Flat
Washer
1/4” Lock
Washer
1/4”
T-Nut
5/16” Flat
Washer
5/16” Lock
Washer
5/16”
T-Nut
1826
1825
H7
Other Parts
Fig. 3.2
Fig. 3.3
G1
H7
G1
G1
H7
Fig. 3.1
Bolt-Thru
Swing Hangers
Triangle Plates
