BIG ASS FANS Haiku S3127-A2-XX-XX-02-C, Installation Manual

Page: 6 / 24

©2013 DELTA T CORP. ALL RIGHTS RESERVED.
2
INTRODUCTION (CONT.)
10 9
8
7
6
5
4
2
1
3
Parts and hardware
If you are missing any parts or hardware required for the installation or operation of your Haiku, contact
Haiku Technical Service. Note: Drawings below are not to scale.
11
12
Rubber bushing
Mounting bracket
(2) Mount brace bracket
Wiring cover
Wiring cover trim
Lower cover
(3) Airfoil
Motor hub
Remote control
EMI filter
1
1
2
3
4
5
6
9
8
7
10
Mounting hardware
• (2) M6 x 1 x 25 mm Socket
head cap screw
2
• (2) M6 x 1 Nylock Nut 2
• M8 Bolt
• 8 mm Flat washer
• 8 mm Lock washer
• M8 Nut
• 2 mm x 2 mm Split pin
• Safety cable shackle
3
11 Airfoil hardware
• (6) 5 mm Lock washer
• (6) M5 Airfoil screw
• (6) Airfoil grommet
4
Wiring hardware
• (4) Wire nut
• (2) Wiring cover screw
12
1. If the EMI filter is included with your fan (country dependent), please install it with your fan.
2. If installing the fan to a junction box, only one (1) bolt and one (1) nut are needed.
3. Safety cable is not shown.
4. Haiku Bamboo only.
13
13
Haiku
Haiku Bamboo
Haiku only