©2013 DELTA T CORP. ALL RIGHTS RESERVED.
8
Step 4. Attaching the mounting bracket
Ensure wiring has been routed to the fan site.
Secure the mounting bracket to the outlet box with the hardware
supplied with the outlet box. Seat the rubber bushing in the eye
of the mounting bracket as shown.
Make sure to mount the bracket in the correct mounting
holes on the outlet box!
The ceiling-mounted outlet box must be suitable for fan support.
MOUNTING (CONT.)
Mount Brace
Bracket
Mount Brace
Bracket
Socket Head
Cap Screw
Nylock
Nut
Step 5. Installing the mount brace
Loosely install the mount brace brackets with the provided hardware as shown below. The bolt should
be inserted in the middle bolt hole on the brackets. Do not fully tighten the hardware.
Step 3. Installing the wiring cover and trim
With the fan in the upright position, remove the protective
covering from the extension tube.
Slide the wiring cover and wiring cover trim over the
extension tube, resting them on the fan hub.
Wiring
cover
Wiring
cover trim
Summary of Contents for Haiku S3127-A2-XX-XX-02-C
