BIG ASS FANS Haiku S3127-A2-XX-XX-02-C, Installation Manual

Page: 9 / 24

HAIKU ® by Big Ass Fans
5
Review the safety guidelines. If you are not completely comfortable or have questions about any
aspect of the installation process, consult a structural engineer or electrical contractor or contact Haiku
Technical Service for assistance.
Step 1. Installing the airfoils
Position the fan upside-down . Remove the plastic protective cover and tape from the bottom of the
fan unless you are installing Haiku
®
with SenseME
™
. If installing Haiku with SenseME, leave the plastic
protective cover and (4) screws on the bottom of the fan until you are ready to install the lower cover.
Moving clockwise around the fan, align each airfoil with a fan hub tab and firmly press it into place.
Make sure that the colored stickers match the colors of the stickers on the attachment of the fan hub. Loosely
secure the airfoils with the provided (6) airfoil screws and grommets. Once the airfoils are in position,
fully tighten the screws to secure the airfoils to the fan hub.
Visit www.haikufan.com to view installation videos illustrating the airfoil installation process.
Be careful not to damage the circuit board while installing airfoils!
tip!
MOUNTING
Haiku ®
To ease airfoil installation, the (3) motor top screws can be loosened. Do not forget to retighten them! tip!
Haiku ® Bamboo
Motor
top screw